AEG Service, Repair Manuals. EWD, Error Codes

AEG electrical components and functions, Specifications of actuators and sensors, 

Power feed and selection of programmes, Basic circuit diagrams, Displaying alarms and enabling mechanical systems. Freezer Repair Manual, Service Mode Settings

AEG Washing machines, Ovens, dishwashers, Dryers, Refrigerators, Freezers,  Microwave Oven

• AEG Washer All Error Codes List>>
• AEG Dishwasher Error Codes List>>
• AEG Hob, Oven, Microwave Error Code List>>

During the operation of the German AEG refrigerator, one of the emergency situations may arise. Using the display, the refrigerator system will report a detected malfunction of your refrigerator using an error code. As a rule, a description of the errors is in the instructions, but if you do not have the operating instructions, then read the error table below:

The main causes of refrigerator noise

If a constant noise appears during operation of the refrigerator, then this is a reason to seek help from a specialist. You should not ignore extraneous noise, as it causes discomfort and can lead to failure of the compressor or other important equipment components.

• incorrect installation. Due to misalignment of the equipment, the compressor (refrigerator motor) may make noise. If the situation is not corrected in a timely manner, it will lead to serious damage. Due to insufficient support, the unit body may vibrate, which creates extraneous noise;
• the compressor does not have enough air. Most often, this problem is faced by owners of small apartments filled with furniture. The gap between the walls of the refrigerator and the furniture should be at least 15 centimeters. Otherwise, there is not enough air to cool the compressor, which creates additional load;
• the fan's service life is ending;
• refrigerant leak - freon;
• breakdown of electrical circuits. To determine the exact cause, electrical circuit diagnostics are carried out. It will allow you to identify damaged elements and replace them;
• failure of the control module. The most common reason is network failures. Frequent power surges lead to breakdowns of electronic components. Only diagnostics using professional equipment will allow you to determine the cause of the breakdown and quickly eliminate it.

The refrigerator gets very hot

The condenser-heat exchanger is responsible for heat removal. In older units it is located at the rear, in modern models it is located in the side walls. The compressor operates at intervals. During operation, the equipment body may be warm. This is a normal phenomenon and indicates that the refrigerator is working properly. Heating the housing is one of the stages in the cooling process of the working space of a refrigerator or freezer. Continuous operation of the compressor indicates a problem. In this case, the refrigerator does not turn off and is constantly freezing, since the compressor works without respite and the refrigerator heats up significantly.

A fairly common reason why a refrigerator heats up is closely located radiators or heating devices. It is not recommended to install refrigeration equipment near radiators and a gas stove. To ensure sufficient air flow to the compressor, the distance from the equipment to the wall or furniture must be at least 15 centimeters. Poor heat transfer can lead not only to heating of the refrigerator, but also to breakdown of the compressor or other components of the refrigerator.

The cause of the refrigerator heating may be:

• loading hot products;
• door not closing tightly;
• failure of the control module